With black or transparent PTex sticks you can quickly and easily carry out repairs on your snowboard and skis. You use a Ptex drip candle to fill in a scratch, so that your ski base is one smooth and flat surface again.
These transparent PTex sticks come in a handy size 190mm long and 6mm fat. They are suitable for any type of ski or snowboard; regardless of whether it is sintered or extruded. You can light the Ski Ptex sticks with a normal briquet. After use you can wax again as before.
Instructions:
Thoroughly clean the entire surface of the ski or snowboard with wax remover.
Clean the damage you want to repair and let it dry out sufficiently.
Then light the Ptex candle on fire with a lighter, keeping the candle close to the surface.
Drop the hot Ptex candle onto the base where the damage is.
Allow to cool sufficiently, and scrape away the excess Ptex with a scraper, knife or clean Alu Oxide stone.
Contents:
either black or transparent, 4 sticks
Tip:
For better adhesion, apply a thin layer first Metal Grip On.
Attention! TTransparent P-Tex can discolour yellow if the combustion temperature rises too high. With poor adhesion, or on the steel edges, the Ptex can also come loose over time.
Burning Ptex can cause a fire hazard, and the fumes are unhealthy. Only use this in a ventilated, controlled environment using the correct equipment.
sticks do not stay lit